headless: register signal handlers synchronously, split tests, drop deployment examples and wording

PROTOCOL.md

@@ -63,10 +63,12 @@ Each instance sees three folders:
 
 | Path | Access | Contents |
 | --- | --- | --- |
-| `/data` | read-write | the actor's state |
+| `/data` | read-write by its actor; readable by every actor | the actor's state |
 | `/public` | read-write | the files that the actor publishes |
 | `/actor` | read-only | the `actor/` folder of the world |
 
+An actor can write only its own `/data`, but can read every actor's `/data` through `/actor/<id>/data/`. `/data` is not private: any unprotected secret file there is readable by every actor.
+
 `/actor/<id>/` holds everything about an actor: `actor.wasm`, `actor.json`
 (installed version, running, subscriptions, tapped, watches), `source/`, `public/`, `data/`,
 `stderr.log`, and `versions/<n>/`. `ls /actor` lists all actors.
@@ -130,7 +132,9 @@ the request: the request's `type` in past tense (`spawned`, `upgraded`,
 | `subscribe`, `unsubscribe` | `actor` | receive (or not) what `actor` publishes |
 | `tap`, `untap` | | receive (or not) a copy of every message the broker routes |
 | `watch`, `unwatch` | `path` | receive (or not) `fs_changed` for every change of `path` or anything under it; answer `{"type": "watching" \| "unwatched", "path"}` with the path as an `/actor/...` path |
-| `exit` | | answer `exiting`, stop every actor, and end the `sausage` process (a wrapper like `nix run .#loop` starts it again, updated) |
+| `exit` | | answer `exiting`, stop every actor, and end the `sausage` process with exit code 75 (a wrapper like `nix run .#loop` starts it again, updated) |
+
+**Headless.** `sausage run --headless [dir]` (or `sausage --headless`, or `SAUSAGE_HEADLESS=1`) turns the console input off: the host does not read stdin, so end of input (`/dev/null`) does not stop the world. `nix run .#loop -- --headless <world>` passes it through the loop. It runs until SIGTERM or SIGINT (stops every actor, exit code 0) or a broker `exit` request (exit code 75, as above). Without the flag, EOF on stdin or `/quit` ends the host.
 
 Paths are `/actor/...`, or the sender's `/public/...` or `/data/...`.
 

README.md

@@ -48,6 +48,18 @@ From a clone (`git clone https://gitea.surma.technology/surma/sausage`), the
 same commands are `nix run`, `nix run -- init`, `nix run -- run` and
 `nix run .#loop`.
 
+### Headless
+
+`--headless` (or `SAUSAGE_HEADLESS=1`) turns the console input off: the host
+never reads stdin, so end of input does not stop the world. It runs until
+SIGTERM/SIGINT (clean stop, exit code 0) or a broker `exit` request (exit
+code 75, so the loop starts the newest version). Create the world first
+(`init`), then pass the flag through the loop:
+
+```sh
+nix run git+https://gitea.surma.technology/surma/sausage#loop -- --headless my-world
+```
+
 In the console:
 
 ```text
@@ -66,7 +78,7 @@ actor.wasm     the current version
 actor.json     installed version, running, subscriptions
 source/        the source of the current version
 public/        files that the actor publishes
-data/          the actor's state
+data/          actor state; owner-writable, world-readable via /actor/<id>/data/ (not private)
 stderr.log     what the actor and the broker write about it
 versions/<n>/  every installed version: actor.wasm, source/, meta.json
 ```

agent/src/prompt.md

@@ -3,3 +3,5 @@ People talk to you through other actors. Your text goes to your subscribers.
 Before writing an actor, read `/actor/broker/public/PROTOCOL.md` for messages, the broker, `cargo`, and tests.
 Read the SDK at `/actor/cargo/public/sdk/` before you write an actor.
 You can change your own source at `/actor/agent/source`.
+
+The global filesystem is readable by every actor, including every actor's `/data` at `/actor/<id>/data/`. An actor can write only its own `/data` and `/public`. `/data` is not private: any unprotected secret file there is readable by every actor.

cli/src/console.rs

@@ -3,7 +3,8 @@
 //! - `@<actor> <json>` sends a JSON body. `@<actor> <text>` sends
 //!   `{"type": "text", "text": ...}`.
 //! - A line without `@` goes to `agent` as text.
-//! - `/help`, `/quit`. EOF on stdin also quits.
+//! - `/help`, `/quit`. EOF on stdin also quits (not with `--headless`, which
+//!   never reads stdin).
 
 use std::sync::Arc;
 

cli/src/main.rs

@@ -5,6 +5,7 @@ use anyhow::{Context, Result, bail};
 use clap::{Parser, Subcommand};
 use include_dir::{Dir, include_dir};
 use serde_json::json;
+use tokio::signal::unix::Signal;
 
 use sausage::world::{ActorMeta, World};
 use sausage::{Host, cargo_actor, console};
@@ -17,6 +18,11 @@ static AGENT_SOURCE: Dir<'_> = include_dir!("$CARGO_MANIFEST_DIR/../agent");
 #[derive(Parser)]
 #[command(version, about)]
 struct Cli {
+    /// Do not read stdin, so end of input does not stop the world. It runs
+    /// until SIGTERM (or SIGINT), or until an actor sends
+    /// `@broker {"type":"exit"}`. Also set by SAUSAGE_HEADLESS=1.
+    #[arg(long, global = true)]
+    headless: bool,
     #[command(subcommand)]
     command: Option<Cmd>,
 }
@@ -91,13 +97,41 @@ async fn init(dir: PathBuf) -> Result<()> {
     Ok(())
 }
 
-async fn run(dir: PathBuf) -> Result<()> {
+/// Install the SIGTERM and SIGINT handlers now (not when first polled).
+fn termination_signals() -> Result<(Signal, Signal)> {
+    use tokio::signal::unix::{SignalKind, signal};
+    let term = signal(SignalKind::terminate()).context("install SIGTERM handler")?;
+    let int = signal(SignalKind::interrupt()).context("install SIGINT handler")?;
+    Ok((term, int))
+}
+
+/// Resolves on SIGTERM or SIGINT.
+async fn termination((mut term, mut int): (Signal, Signal)) {
+    tokio::select! {
+        _ = term.recv() => {}
+        _ = int.recv() => {}
+    }
+}
+
+async fn run(dir: PathBuf, headless: bool) -> Result<()> {
+    // Register the signal handlers before the host starts, so a signal that
+    // arrives early is never the default (kill) action.
+    let signals = if headless { Some(termination_signals()?) } else { None };
     let host = Host::start(&dir).await?;
     tokio::spawn(console::run_mailbox(host.mailbox(console::ID)));
     let broker = host.broker.clone();
-    let exit = tokio::select! {
+    let exit = match signals {
-        _ = console::run_input(host.broker.clone()) => false,
+        Some(signals) => {
-        _ = broker.exit_requested() => true,
+            println!("Sausage headless: running until SIGTERM or an exit request.");
+            tokio::select! {
+                _ = termination(signals) => false,
+                _ = broker.exit_requested() => true,
+            }
+        }
+        None => tokio::select! {
+            _ = console::run_input(host.broker.clone()) => false,
+            _ = broker.exit_requested() => true,
+        },
     };
     println!("Stopping actors …");
     host.stop().await;
@@ -113,16 +147,18 @@ async fn run(dir: PathBuf) -> Result<()> {
 
 #[tokio::main]
 async fn main() -> Result<()> {
-    match Cli::parse().command {
+    let cli = Cli::parse();
+    let headless = cli.headless || std::env::var("SAUSAGE_HEADLESS").is_ok_and(|v| !v.is_empty() && v != "0");
+    match cli.command {
         Some(Cmd::Init { dir }) => init(dir).await,
-        Some(Cmd::Run { dir }) => run(dir).await,
+        Some(Cmd::Run { dir }) => run(dir, headless).await,
         None => {
             let dir = PathBuf::from("world");
             if !dir.join("actor").is_dir() {
                 println!("No world in ./world yet, creating it (same as `sausage init`).");
                 init(dir.clone()).await?;
             }
-            run(dir).await
+            run(dir, headless).await
         }
     }
 }

cli/tests/cli.rs

@@ -39,3 +39,47 @@ fn bare_command_without_a_world_starts_init() {
     // It asks before it creates anything.
     assert!(!dir.join("world").exists());
 }
+
+/// Start a headless host on a fresh world with stdin at EOF; returns once it
+/// printed its ready line (printed after the signal handlers are installed).
+fn start_headless(label: &str) -> (std::process::Child, std::io::Lines<std::io::BufReader<std::process::ChildStdout>>) {
+    use std::io::{BufRead, BufReader};
+    let dir = empty_dir(label);
+    let world = dir.join("world");
+    sausage::World::create(&world).unwrap();
+    let mut child = Command::new(env!("CARGO_BIN_EXE_sausage"))
+        .args(["run", "--headless"])
+        .arg(&world)
+        .stdin(Stdio::null())
+        .stdout(Stdio::piped())
+        .stderr(Stdio::null())
+        .spawn()
+        .unwrap();
+    let mut lines = BufReader::new(child.stdout.take().unwrap()).lines();
+    let line = lines.next().expect("host exited before it started").unwrap();
+    assert!(line.contains("headless"), "unexpected first line: {line}");
+    (child, lines)
+}
+
+/// With stdin at EOF (as soon as the host starts), a headless host stays up.
+#[test]
+fn headless_ignores_stdin_eof() {
+    let (mut child, _lines) = start_headless("headless-eof");
+    std::thread::sleep(std::time::Duration::from_millis(500));
+    let alive = child.try_wait().unwrap().is_none();
+    let _ = child.kill();
+    let _ = child.wait();
+    assert!(alive, "headless host exited on stdin EOF");
+}
+
+/// SIGTERM right after the ready line stops the actors and exits with 0.
+#[test]
+fn headless_stops_cleanly_on_sigterm_right_after_ready() {
+    let (mut child, lines) = start_headless("headless-term");
+    let pid = child.id().to_string();
+    assert!(Command::new("kill").args(["-TERM", &pid]).status().unwrap().success());
+    let rest: Vec<String> = lines.map(|l| l.unwrap()).collect();
+    let status = child.wait().unwrap();
+    assert!(status.success(), "exit status {status:?}, output {rest:?}");
+    assert!(rest.iter().any(|l| l.contains("Stopping actors")), "output {rest:?}");
+}